Arduino mega 2560 rev3 pinout install#

Then open Arduino IDE and choose the accurate boar and serial port from the tools function.

Then connect This Arduino to a computer through the use of a USB.

Arduino mega 2560 rev3 pinout install#

First of all download and install Arduino IDE from their site.Here are some steps discussed to use the Arduino Mega 2560 Rev3.Arduino IDE consists of groups of libraries that help to program it and get its features.After connection, it can be programmed through the use of Arduino IDE which is open-source software. This board has a USB cable that can be attached to the computer.

The use of thus Arduino is very simple.Pins A0-A15: These are analog pins that can be used for reading analog volts from sensor and oterh devices.Pins 58-59: These are external serial communication pins.Pins 56-57: These pins performed the I2C communication, here devices that follow I2C protocol connected.Pins 54-55: Through these pins SPIcommunction of the board performed.Pins 22-53: These are GPIO digital pins.Pins 16 to 21: These are also PWM pinouts.Pins 14-15: These are additional serial communication pinouts.Pins 6 to 13: These pins are PWM and operate to control LED brightness and motor speed.They can work as triggers when the signal varies Pins 2 to 5: These are interrupt pinouts.Pins 0 and 1: Thee two pins are used for serial communication (RX0 and TX0).Her details of pins operation are explained.Flash memory: 256 KB of which 8 KB is used by the bootloader.DC current for 3.3V pin: 50 milliamperes.DC current for single I/O pinout: 20 milliamperes.Digital I/O pins: 54 (fifteen are PWM outputs).The technical features of the Arduino Mega 2560 Rev3 are discussed here.Technical Features of Arduino Mega 2560 Rev3 It has eight kilobyte SRAM and four kilobyte EEPROM.Comes with fifty-four digital inputs and outputs with sixteen analog inputs.It comes with different features that are described here.